ITCertKing exam dumps are written by IT elite who have more than ten years experience, through research and practice. ITCertKing provides you with the latest and the most accurate questions and answers. ITCertKing exists for your success. To choose ITCertKing is to choose your success. If you want to pass HP HP0-207 certification exam, ITCertKing is your unique choice.
Of course, when you are seeking for exam materials, it is certain that you will find many different materials. However, through investigation or personal experience, you will find ITCertKing questions and answers are the best ones for your need. The candidates have not enough time to prepare the exam, while ITCertKing certification training materials are to develop to solve the problem. So, it can save much time for us. What's more important, 100% guarantee to pass HP HP0-207 exam at the first attempt. In addition, ITCertKing exam dumps will be updated at any time. If exam outline and the content change, ITCertKing can provide you with the latest information.
Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the HP HP0-207 exam. I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult. But it does not matter, because I chose ITCertKing's HP HP0-207 exam training materials. It can help me realize my dream. If you also have a IT dream, quickly put it into reality. Select ITCertKing's HP HP0-207 exam training materials, and it is absolutely trustworthy.
How to get to heaven? Shortcart is only one. Which is using ITCertKing's HP HP0-207 exam training materials. This is the advice to every IT candidate, and hope you can reach your dream of paradise.
Exam Code: HP0-207
Exam Name: HP (Procurve Adaptive EDGE Fundamentals)
One year free update, No help, Full refund!
Total Q&A: 120 Questions and Answers
Last Update: 2014-02-08
Are you IT person? Do you want to succeed? If you want to succeed, please do to buy ITCertKing's HP HP0-207 exam training materials. Our training materials have through the test of practice. it can help you to pass the IT exam. With the ITCertKing's HP HP0-207 exam training materials, you will have better development in the IT industry. You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? ITCertKing's HP HP0-207 exam training materials will satisfy your desire. We are through thick and thin with you and to accept this challenge together .
ITCertKing, as a provider, specializing in providing all candidates with IT exam-related materials,focus on offering the most excellent dumps for the candidates. In contrast with other websites, ITCertKing is more trustworthy. Why? Because ITCertKing has many years of experience and our IT experts have been devoted themselves to the study of IT certification exam and summarize IT exam rules. Thus, ITCertKing exam dumps have a high hit rate. Meanwhile, it guarantees the qualification rate in the exam. Therefore, ITCertKing got everyone's trust.
HP0-207 Free Demo Download: http://www.itcertking.com/HP0-207_exam.html
NO.1 How do ProCurve switches, configured with link aggregation (also known as port trunking),
handle broadcast traffic?
A.Broadcast traffic is flooded through all of the ports in the trunk.
B.The switch sends a query and receives permission from potential receivers before flooding.
C.Broadcast traffic is handled in exactly the same way it would be without port trunking configured.
D.Broadcast traffic is flooded through non-trunked ports, but forwarded only through one of the ports in
the trunk.
Correct:D
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.2 A customer is planning a Power over Ethernet deployment for a large call center that will use
VoIP telephones. While planning the wiring closets for the deployment, the customer suggests
using the uplink ports of a ProCurve Switch 2650-PWR to provide power to a ProCurve Switch
2600-8-PWR. Which statement describes a correct response to this suggestion?
A.It is only possible if the second switch is a ProCurve Switch 2626-PWR.
B.It is not possible because the 2600-8-PWR cannot act as a Powered Device.
C.It is only possible if the customer adds a ProCurve 600 EPS/RPS to the first switch.
D.It is not recommended because the second switch will not have adequate power redundancy.
Correct:B
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.3 At a customer site, you have configured four ProCurve switches for HP Switch Meshing and
Multiple Spanning Tree Protocol. How will the mesh appear to non-mesh switches in the same
spanning tree domain?
A.as a single device
B.as a set of devices without redundant links
C.as devices that cannot participate in the spanning tree
D.as a set of devices with spanning tree enabled to block redundant links
Correct:A
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.4 You must update the software on a customer's ProCurve Switch 5412zl. Which statement
correctly describes the process for this operation? Select TWO.
A.Use TFTP for direct serial transfer of the software.
B.Use FTP for in-band transfer of the software through an IP network.
C.Use TFTP for in-band transfer of the software through an IP network.
D.Transfer the software from your workstation using a direct serial transfer.
E.Instruct the switch to search for any available TFTP server without knowing its IP address.
Correct:C D
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.5 You are assigned to configure ProCurve switches at a customer site for in-band management.
Which are in-band management methods? Select TWO.
A.Telnet
B.SNMP
C.XMODEM
D.serial console
E.menu interface
Correct:A B
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.6 How is traffic prioritization accomplished with IEEE 802.1p?
A.802.1Q-compliant devices enforce priorities based on VLAN ID.
B.802.1Q-compliant devices set one of 8 values in a 3-bit field in the VLAN tag.
C.802.1Q-compliant devices set one of 64 values in a 6-bit field in the IP datagram header.
D.802.1Q-compliant devices dedicate a portion of available bandwidth to each prioritized conversation.
Correct:B
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.7 While using the CLI to configure a ProCurve switch, you must change context from the manager
level to the global configuration level. Which command do you use?
A.exit
B.write
C.global
D.enable
E.configure
Correct:E
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.8 You are configuring a ProCurve Layer 2 switch to obtain time information from an SNTP server
located on a different IP network than the switch. Which configuration steps are necessary on the
switch to enable this functionality?
A.The switch cannot be configured to obtain time information from a server on a different IP network.
B.Define a default gateway for the switch, enable SNTP, use the sntp server command to enter the IP
address of the server.
C.Assign a port on the switch to a VLAN that includes the SNTP server, enable SNTP, configure the
switch for SNTP unicast mode.
D.Configure an IP address on the same IP network as the SNTP server, enable TimeP, configure the
switch for SNTP broadcast mode.
Correct:B
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.9 What are the primary solution categories of the Adaptive EDGE Architecture? Select THREE.
A.mobility
B.security
C.reliability
D.availability
E.upgradeability
F.convergence
G.cost-effectiveness
Correct:A B F
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.10 You configured Rapid Spanning Tree Protocol on four ProCurve Switch 5348xl switches at a
customer site. During the configuration, you forgot to configure the switches so that
switch-to-switch links are not defined as edge ports. Which statement describes the consequence
of your oversight?
A.The switches in the spanning tree will elect multiple Root bridges.
B.The switches will reject the spanning tree configuration and block all ports until the configuration is
corrected.
C.The switches will be unable to elect a Root bridge and will not be able to forward traffic until the
configuration is corrected.
D.The switches will require more time to elect the Root bridge and resolve the topology, but the spanning
tree will otherwise function normally.
Correct:D
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.11 You must remotely manage a customer's switch using Telnet. Which configuration/monitoring
interfaces are available? Select TWO.
A.web interface
B.menu interface
C.ProCurve Manager
D.boot monitor interface
E.command line interface
Correct:B E
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.12 You are implementing a fully connected HP Switch Mesh at a customer site. Which statement
describes a valid design guideline for HP Switch Meshing?
A.A switch may be connected to no more than four mesh domains.
B.Up to five Switch 5400zl Series switches can be included in a full mesh.
C.All links in a full mesh must operate at the same speed and use the same media type.
D.When a switch is configured for HP Switch Meshing protocol, all of the ports on that switch must
participate in the mesh.
Correct:B
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.13 You are about to update the software on a ProCurve switch. Which command do you use to view
a list of all software versions stored on the switch?
A.show run
B.show flash
C.show startup
D.show version
Correct:B
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.14 On switches that support the Switch Setup screen interface, which parameters can be
configured on the Switch Setup screen? Select TWO.
A.STP bridge priority
B.IP address of the TACACS+ server
C.system name and contact information
D.IP address and subnet mask for each VLAN
E.IP address and subnet mask for the default VLAN
Correct:C E
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.15 You are installing a ProCurve switch at a customer site and must enable remote management
for network administrators. Which configuration parameter is necessary to ensure that
administrators can manage the switch even if they are on different IP networks?
A.default VLAN
B.default gateway
C.default password
D.default management profile
Correct:B
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.16 You have been asked to configure IGMP on a ProCurve Switch 6200yl at a customer site. What
are the steps for enabling IGMP on the switch?
A.Enter the manager level, then issue the ip igmp command.
B.Enter the global configuration context, then issue the ip igmp command.
C.Enter the VLAN context for each VLAN that will support IGMP, then issue the ip igmp command.
D.Enter the interface configuration context for each port configured with a VLAN, then issue the ip igmp
command.
Correct:C
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.17 While using the CLI to configure a ProCurve switch, you must move from the global
configuration level to the port context configuration level for port a1. Which command do you use?
A.port a1
B.ethernet a1
C.interface a1
D.configure a1
Correct:C
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.18 You are about to configure HP Switch Meshing on four ProCurve switches at a customer site.
All of the ports that will be included in the mesh are configured for membership in customer
VLANs. How will the mesh configuration affect the VLAN configuration?
A.The mesh ports will automatically become a tagged member of all configured VLANs.
B.The mesh ports will not be a member of any VLANs until you manually configure its VLAN assignments.
C.The mesh ports will not be 802.1Q-compliant and will only be able to retain membership in a single
untagged VLAN.
D.The mesh ports will automatically become a member of the default VLAN and must be configured for
other VLAN membership.
Correct:A
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.19 What are the key principles of the Adaptive EDGE architecture? Select TWO.
A.Control to the Edge
B.Control to the Desktop
C.Command from the Center
D.Management from Anywhere
E.Security throughout the Network
Correct:A C
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
NO.20 While examining the spanning tree configuration on a ProCurve switch, you notice that one of
the ports is in the Blocking state. Which statement describes how this port will function in this
state?
A.The port is completely blocked for all purposes.
B.The switch will not forward user traffic through that port, but will forward telnet traffic.
C.The switch will not forward user traffic through that port, but will forward BPDUs through that port.
D.The switch forwards user traffic through that port, but does not receive user traffic through that port.
Correct:C
HP HP0-207 test questions HP0-207 study guide HP0-207 exam simulations HP0-207 certification training
ITCertKing offer the latest 1Y0-A19 exam material and high-quality 1Z0-807 pdf questions & answers. Our 000-585 VCE testing engine and 000-198 study guide can help you pass the real exam. High-quality 1Z0-027 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/HP0-207_exam.html
没有评论:
发表评论